Universitas Negeri Semarang - Indonesia
Kentong Damping Sound Intensity Level Based on Kentongan Length Variations
This study aims to determine the attenuation of the sound produced by a Kentongan musical instrument based on variations in the length of the Kentongan. Data were collected in a quiet room by starting to measure the noise and atmosphere of the room. This study used Sound Meter Software with version 3.4.5 with a maximum sound intensity limit of ~ 90 dB, mobile as an intermediary. This study used Kentongan with a length of 1, 29 cm and a length of 2 that was 34.1 cm. Experiments were carried out 3 times with the first experiment without Kentongan, then Kentongan 1 and then Kentongan 2. The sound intensity produced by without Kentongan is an average of 60.08 dB, then with Kentongan 1 that is, with an average of 61.86 dB, and Kentongan 2 with an average of 56.68 dB.
©2019 JNSMR UIN Walisongo. All rights reserved.
Keywords: intensity level, sound, bamboo, kentongan.
- Arsad, E. (2015). Teknologi pengolahan dan manfaat bambu. Jurnal Riset Industri Hasil Hutan, 7(1), 45-52.
- Krisdianto, G. S., & Ismanto, A. (2000). Sari hasil penelitian bambu. Pusat Penelitian dan Pengembangan Hasil Hutan, Bogor.
- Nursulistiyo, E. Pemanfaatan Suling Bambu Pentatonik Sebagai Media Pembelajaran Fisika.
- Octriviana, Riskyhanti, Ainnurasjid Ainnurasjid, and Noer Rahmi Ardiarini. "Observasi plasma nutfah bambu di Kabupaten Malang." Jurnal Produksi Tanaman 5.6 (2018).
- Oka, G. M. (2005). Cara Penentuan Kelas Kuat Acuan Bambu Petung. Mektrik, 7(2).
- Pathurahman, J. F., & Kusuma, D. A. (2004). Aplikasi bambu pilinan sebagai tulangan
- balok beton. Civil Engineering Dimension, 5(1), 39-44.
- Sarah, S. (2015). Spektrum Bunyi Alat Musik Kentong Berdasarkan Variasi Jumlah Lubang. Jurnal Teknologi Technoscientia, 7(2), 150-156.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.