Monitoring Ruangan Berbasis Internet of Things Menggunakan Thingsboard dan Blynk

Authors

  • Yudi Eko Windarto Universitas Diponegoro, Indonesia http://orcid.org/0000-0003-0349-3659
  • Bryan Monang Wiener Samosir Universitas Diponegoro, Indonesia
  • Muhammad Richie Assariy Universitas Diponegoro, Indonesia

DOI:

https://doi.org/10.21580/wjit.2020.2.2.5798

Abstract

Technology designed to facilitate humans in a variety of work. A very popular technology today is the Internet of Things. The application of Internet of Things technology is widely used in various fields at present. One was used to monitor the room. The methodology used in this study is a Hardware Development Life Cycle (HDLC). The results of this research that the device can transmit ambient conditions via the Internet of Things with protocol Message Queuing Telemetry Transport (MQTT). In this study, Raspberry Pi serves as an intermediary between the media data is read by the sensor is then stored on the application Thingsboard. In addition the application Blynk used as a medium for monitoring the device remotely.

Downloads

Download data is not yet available.

Author Biographies

Yudi Eko Windarto, Universitas Diponegoro

Departemen Teknik Komputer, Fakultas Teknik Universitas Diponegoro

Bryan Monang Wiener Samosir, Universitas Diponegoro

Departemen Teknik Komputer, Fakultas Teknik Universitas Diponegoro

Muhammad Richie Assariy, Universitas Diponegoro

Departemen Teknik Komputer, Fakultas Teknik Universitas Diponegoro

References

Annamaa, A. (2015). Introducing Thonny, a Python IDE for learning programming. In Proceedings of the 15th Koli Calling Conference on Computing Education Research - Koli Calling ’15 (Vol. 19-22-Nov-, pp. 117–121). New York, New York, USA: ACM Press. https://doi.org/10.1145/2828959.2828969

De Paolis, L. T., De Luca, V., & Paiano, R. (2018). Sensor data collection and analytics with thingsboard and spark streaming. EESMS 2018 - Environmental, Energy, and Structural Monitoring Systems, Proceedings, 1–6. https://doi.org/10.1109/EESMS.2018.8405822

Fan, X., Xie, Q., Li, X., Huang, H., Wang, J., Chen, S., … Chen, J. (2017). Activity Recognition as a Service for Smart Home: Ambient Assisted Living Application via Sensing Home. In 2017 IEEE International Conference on AI & Mobile Services (AIMS) (pp. 54–61). IEEE. https://doi.org/10.1109/AIMS.2017.29

Kamalakannan, M., & Devadharshini, K. (2019). Controlling the Speed of Conveyor Belt using Python – Raspberry Pi 3B+. Oriental Journal of Computer Science and Technology, 12(2), 57–64. https://doi.org/10.13005/ojcst12.02.05

Kashyap, M., Sharma, V., & Gupta, N. (2018). Taking MQTT and NodeMcu to IOT: Communication in Internet of Things. Procedia Computer Science, 132(Iccids), 1611–1618. https://doi.org/10.1016/j.procs.2018.05.126

Koo, D. D., Lee, J. J., Sebastiani, A., & Kim, J. (2016). An Internet-of-Things (IoT) System Development and Implementation for Bathroom Safety Enhancement. Procedia Engineering, 145, 396–403. https://doi.org/10.1016/j.proeng.2016.04.004

Mao, X., Li, K., Zhang, Z., & Liang, J. (2017). Design and implementation of a new smart home control system based on internet of things. In 2017 International Smart Cities Conference (ISC2) (pp. 1–5). IEEE. https://doi.org/10.1109/ISC2.2017.8090790

Media’s, E., . S., & Rif’an, M. (2019). Internet of Things (IoT): BLYNK Framework for Smart Home. KnE Social Sciences, 3(12), 579. https://doi.org/10.18502/kss.v3i12.4128

Microchip Technology Incorporate. (2007). Low-Power Linear Active Thermistor ICs - MCP9700/9700A MCP9701/9701A Datasheet.

Pareek, T. G., Padaki, R., Iyer, A., & Priya, G. (2017). App Based Device Controlling System. International Journal of Advanced Research in Computer Science, 8(5), 2121–2125.

Park, E., Cho, Y., Han, J., & Kwon, S. J. (2017). Comprehensive Approaches to User Acceptance of Internet of Things in a Smart Home Environment. IEEE Internet of Things Journal, 4(6), 2342–2350. https://doi.org/10.1109/JIOT.2017.2750765

Patel, K. K., Patel, S. M., Scholar, P. G., & Iot, T. (2018). Introduction to IOT. International Journal of Engineering Science and Computing, 5(1), 41–44. https://doi.org/10.17148/IARJSET.2018.517

Perkasa, T. R., Widyantara, H., & Susanto, P. (2014). Rancang Bangun Pendeteksi Gerak Menggunakan Metode Image Substraction Pada Single Board Computer (SBC). Journal of Control and Network Systems, 3(2), 90–97.

Syahidulhaq, H. A., Hafiddudin, H., & Aulia, S. (2017). SISTEM KEAMANAN BERBASIS ALARM IP CAMERA DENGAN PASSIVE INFRARED RECEIVER (PIR) SENSOR DAN SMS GATEWAY. Jurnal Elektro Dan Telekomunikasi Terapan, 3(2), 312–320. https://doi.org/10.25124/jett.v3i2.300

Vadillo, L., Martín-Ruiz, M. L., Pau, I., Conde, R., & Valero, M. Á. (2017). A Smart Telecare System at Digital Home: Perceived Usefulness, Satisfaction, and Expectations for Healthcare Professionals. Journal of Sensors, 2017, 1–12. https://doi.org/10.1155/2017/8972350

Vaidya, V. D., & Vishwakarma, P. (2018). A Comparative Analysis on Smart Home System to Control, Monitor and Secure Home, based on technologies like GSM, IOT, Bluetooth and PIC Microcontroller with ZigBee Modulation. In 2018 International Conference on Smart City and Emerging Technology (ICSCET) (pp. 1–4). IEEE. https://doi.org/10.1109/ICSCET.2018.8537381

Wagyana, A., Zulhelman, & Rahmat. (2019). Development of Multi-Sensor Smart Power Outlet to Optimize Building Electrical Automation System. Journal of Physics: Conference Series, 1364(1), 012033. https://doi.org/10.1088/1742-6596/1364/1/012033

Wai Zhao, C., Jegatheesan, J., & Chee Loon, S. (2015). Exploring IOT Application Using Raspberry Pi. International Journal of Computer Networks and Applications, 2(1), 27–34. Retrieved from http://www.digi.com

Xu, H., He, Y., Sun, X., He, J., & Xu, Q. (2020). Prediction of thermal energy inside smart homes using IoT and classifier ensemble techniques. Computer Communications, 151, 581–589. https://doi.org/10.1016/j.comcom.2019.12.020

Zhu, Z. M., Xu, F. Q., & Gao, X. (2020). Research on school intelligent classroom management system based on internet of things. Procedia Computer Science, 166, 144–149. https://doi.org/10.1016/j.procs.2020.02.037

Zlatanov, N. (2016). Arduino and Open Source Computer Hardware and Software. Journal of Water, Sanitation and Hygiene for Development, 10(11), 1–8. https://doi.org/10.13140/RG.2.1.1071.7849

Downloads

Additional Files

Published

2020-12-31

Issue

Vol. 2 No. 2 (2020): Walisongo Journal of Information Technology

Section

Articles

License

The copyright of the received article shall be assigned to the journal as the publisher of the journal. The intended copyright includes the right to publish the article in various forms (including reprints). The journal maintains the publishing rights to the published articles. Authors are allowed to use their articles for any legal purposes deemed necessary without written permission from the journal with an acknowledgment of initial publication to this journal.


Licensing

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.