Development of Tools Growth Catfish Based on the Internet of Things (IoT)

Ahmad Minanur Rohim*    -  MTS NU I’anatuth Thullab, Mutih Kulon Demak, Indonesia Postgraduate, Universitas Negeri Semarang, Indonesia, Indonesia
Edy Cahyono  -  Postgraduate, Universitas Negeri Semarang, Indonesia, Indonesia
Retno Sri Iswari  -  Postgraduate, Universitas Negeri Semarang, Indonesia, Indonesia

(*) Corresponding Author
Factors that affect the growth of catfish include water temperature, pH levels, and feeding according to the growth of catfish. Feeding and water replacement are currently still done manually, using human power. Maintaining feed and water quality in the tub automatically is necessary to save time and effort. The automatic settings to maintain feed and water temperature as well as good water acidity for catfish in the tub can use the NodeMCU microcontroller. This research method is carried out by designing tools, testing tools, objects and stages of tools and concluding. Parameters of water temperature and pH levels of water are sent to the telegram application, as well as to regulate the discharge of water, a pump that works automatically is used through a relay that is installed automatically. The monitoring results are successfully displayed via the ThingViewer application. The tool has worked well with tests carried out including testing the design of the tool, testing the temperature sensor, testing the pH sensor, and testing the sending of orders from Telegram. The yields obtained were different between the two treatments, namely without using tools (non-tools) using tools (tools), the ideal growth of catfish for a temperature of 29 °C and a minimum pH of 6.5 and a maximum of 9.

Keywords: Internet of Things; Catfish; NodeMCU

  1. Abdel-Aziz, M. F. A., Hassan, H. U., Yones, A. M., Abdel-Tawwab, Y. A., & Metwalli, A. A. A. T. (2021). Assessing the effect of different feeding frequencies combined with stocking density, initial weight, and dietary protein ratio on the growth performance of tilapia, catfish and carp. Scientific African, 12, e00806.
  2. Azizah, S. N., Susilowati, T., Yuniarti, T., Harwanto, D., & Basuki, F. (2019). The Effect of Different Stocking Density of Eggs on the Production of Sangkuriang Catfish Seeds (Clarias gariepinus Burchell 1822) by Using Filtration System. IOP Conference Series: Earth and Environmental Science, 246(1).
  3. Bento, D. A. C. (2018). IoT: NodeMCU 12e X Arduino Uno, Results of an experimental and comparative survey. International Journal of Advance Research in Computer Science and Management Studies, 6(1), 46–56.
  4. Besson, M., Vandeputte, M., van Arendonk, J. A. M., Aubin, J., de Boer, I. J. M., Quillet, E., & Komen, H. (2016). Influence of water temperature on the economic value of growth rate in fish farming: The case of sea bass (Dicentrarchus labrax) cage farming in the Mediterranean. Aquaculture, 462, 47–55.
  5. Fitria, E. Y., Murti, M. A., & Setianingsih, C. (2021). Design of Integrated Control System Based On IoT With Context Aware Method In Hydroponic Plants. 2021 IEEE International Conference on Industry 4.0, Artificial Intelligence, and Communications Technology (IAICT), 20–26.
  6. Hasan, Z., Andriani, Y., Hamdani, H., Sahidin, A., & Surbakti, S. B. (2020). Effect of Probiotics Addition with Different Dosage on Water Quality Performance of Sangkuriang Catfish (Clarias gariepinus) Farming in the Aquaponic System. January.
  7. Hasyimia, U. S. Al, Dewi, N. K., & Pribadi, T. A. (2016). Identifikasi Ektoparasit Pada Ikan Lele Sangkuriang (Clarias gariepinus) yang Dibudidayakan di Balai Benih Ikan (BBI) Boja Kendal. Life Science, 5(1), 1–8.
  8. Junaidi, Putra, T. M., Surtono, A., Puazi, G. A., Suciyati, S. W., Firdaus, I., & Rumiyanti, L. (2021). Measurement of Physical Parameters of Water Quality in Real-Time Based on Arduino. Journal of Physics: Conference Series, 1751(1).
  9. Mulyani, M. (2017). Analisis Pendapatan Usaha Budidaya Ikan Kolam Terpal Di Kecamatan Rimbo Ulu. Jurnal MeA (Media Agribisnis), 2(1), 28.
  10. Nugroho, F., & Pantjawati, A. B. (2018). Automation and Monitoring Smart Kitchen Based on Internet of Things (IoT). IOP Conference Series: Materials Science and Engineering, 384(1).
  11. Prihatini, E. S., & Febrianto, Y. (2021). Pemberian Persentase Protein Yang Berbeda Dalam Pakan Giving Different Protein Percentages in Feed for Survival. V(1), 24–34.
  12. Prihatmoko, D. (2016). Perancangan Dan Implementasi Pengontrol Suhu Ruangan Berbasis Mikrokontroller Arduino Uno. Simetris : Jurnal Teknik Mesin, Elektro Dan Ilmu Komputer, 7(1), 117.
  13. Retnowati, D., Anshori, M., Fudhla, A. F., Ardiasyah, G., Ardhyani, I. W., & & Puspita, A. D. (2020). Pelatihan Budidaya Pembesaran Ikan Lele di Desa Tanjungan Driyorejo Gresik. Jurnal Pengabdian Masyarakat, 2 (2).
  14. Saputro, A. D. (2016). Membangun Ekonomi Islam Denga Melestarikan Linkungan (Menanam Sayur Organik dan BudidayaLele Organik). Jurnal Ekonomi, XXI(01), 143–157.
  15. Sihombing, P., Karina, N. A., Tarigan, J. T., & Syarif, M. I. (2018). Automated hydroponics nutrition plants systems using arduino uno microcontroller based on android. Journal of Physics: Conference Series, 978(1).
  16. Škraba, A., Koložvari, A., Kofjač, D., Stojanović, R., Stanovov, V., & Semenkin, E. (2016). Streaming pulse data to the cloud with bluetooth le or NODEMCU ESP8266. 2016 5th Mediterranean Conference on Embedded Computing, MECO 2016 - Including ECyPS 2016, BIOENG.MED 2016, MECO: Student Challenge 2016, 428–431.
  17. Suraya, U., Yasin, M. N., & Rozik, M. (2016). Penerapan Teknologi Budidaya Ikan Lele Sangkuriang. Jurnal Udayana Mengabdi, 15(0536), 236–242.
  18. Taragusti, A. S., Santanumurti, M. B., Rahardja, B. S., & Prayogo. (2019). Effectiveness of Nitrobacter on the specific growth rate, survival rate and feed conversion ratio of dumbo catfish Clarias sp. with density differences in the aquaponic system. IOP Conference Series: Earth and Environmental Science, 236(1).
  19. Vera, V. F. S., Ekawita, R., & Yuliza, E. (2021). Desain Bangun pH Tanah Digital Berbasis Arduino Uno. Journal Online of Physics, 7(1), 36–41.

Open Access Copyright (c) 2022 Physics Education Research Journal
Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.