Design of Thermoelectric Peltier Effect Demonstrator using Modul TEC-12706 and TEG-SP1848

Fachrizal Rian Pratama*    -  Universitas Islam Negeri Walisongo Semarang, Indonesia
Vierta Saraswati  -  Graduate School of Natural Science and Technology, Kanazawa University, Japan

(*) Corresponding Author
Thermoelectric devices have several advantages, including no moving parts, noise-free operation, long service life, zero-emission, and precise temperature control. Therefore, they have been widely used in solid-state cooling, heating, and power generation. The study of the Thermoelectric Peltier Effect Demonstrator can provide insights into the potential applications and benefits of thermoelectric devices. This research aims to investigate the Thermoelectric Peltier Effect Demonstrator and its applications in solid-state cooling and heating. Specifically, the study aims to examine the Peltier effect generated by applying an electric current to the TEC-12706 and TEG-SP1848 modules connected to a heatsink and placed in a container filled with water. The research methodology involves conducting experiments using the Thermoelectric Peltier Effect Demonstrator. The modules are connected to the heatsink and placed in a water-filled container, and an electric current is applied to generate the Peltier effect. The temperature changes on both sides of the modules and the amount of heat transfer are measured and recorded. The results of the experiments show that the Thermoelectric Peltier Effect Demonstrator can effectively generate the Peltier effect and produce temperature differences between the two sides of the modules. The amount of heat transfer can also be controlled by adjusting the electric current. These findings demonstrate the potential applications of thermoelectric devices in solid-state cooling and heating, as well as their ability to provide more precise temperature control compared to conventional compressors.

Keywords: Demostrator; Module; Tec; Teg; Thermoelectric; Peltier

  1. Bell, L. E. (2008). Cooling, Heating, Generating Heat with and Recovering Waste Thermoelectric. Science, 321(5895), 1457–1461.
  2. Gökçek, M., & Şahin, F. (2017). Experimental performance investigation of mini channel water cooled-thermoelectric refrigerator. Case Studies in Thermal Engineering, 10(February), 54–62. https://doi.org/10.1016/j.csite.2017.03.004
  3. Goldsmid, H. J. (2016). Optimisation and selection of semiconductor thermoelements. In Springer Series in Materials Science (Vol. 121). https://doi.org/10.1007/978-3-662-49256-7_4
  4. Gromov, G. (1962). Thermoelectric Cooling Modules. American Journal of Physics, 30(9), vii–vii. https://doi.org/10.1119/1.1942168
  5. Gürbüz, H., Akçay, H., & Topalcı, Ü. (2022). Experimental investigation of a novel thermoelectric generator design for exhaust waste heat recovery in a gas-fueled SI engine. Applied Thermal Engineering, 216(August), 119122. https://doi.org/10.1016/j.applthermaleng.2022.119122
  6. Hebei I.T. (Shanghai) Co., L. (2010). Performance Specifications of TEC1-12706. Application Note, 2–4. www.hebeiltd.com.cn
  7. Hong, M., Chen, Z. G., & Zou, J. (2018). Fundamental and progress of Bi2Te3-based thermoelectric materials. Chinese Physics B, 27(4). https://doi.org/10.1088/1674-1056/27/4/048403
  8. Lee, H. S. (2013). The Thomson effect and the ideal equation on thermoelectric coolers. Energy, 56, 61–69. https://doi.org/10.1016/j.energy.2013.04.049
  9. Pei, J., Cai, B., Zhuang, H. L., & Li, J. F. (2020). Bi2Te3-based applied thermoelectric materials: Research advances and new challenges. National Science Review, 7(12), 1856–1858. https://doi.org/10.1093/nsr/nwaa259
  10. Saket Kumar, Ashutosh Gupta, Gaurav Yadav, H. P. S. (2015). Peltier Module for Refrigeration and Heating using Embedded System. International Conference on Recent Developments in Control, 3, 2-1-2–1. https://doi.org/10.1201/9781420037043
  11. Sharma, S., Dwivedi, V. K., & Pandit, S. N. (2014). A review of thermoelectric devices for cooling applications. International Journal of Green Energy, 11(9), 899–909. https://doi.org/10.1080/15435075.2013.829778
  12. Soleimani, Z., Zoras, S., Ceranic, B., Shahzad, S., & Cui, Y. (2020). A review on recent developments of thermoelectric materials for room-temperature applications. Sustainable Energy Technologies and Assessments, 37(December 2019), 100604. https://doi.org/10.1016/j.seta.2019.100604
  13. Tian, M. W., Aldawi, F., Anqi, A. E., Moria, H., Dizaji, H. S., & Wae-hayee, M. (2021). Cost-effective and performance analysis of thermoelectricity as a building cooling system; experimental case study based on a single TEC-12706 commercial module. Case Studies in Thermal Engineering, 27(March), 101366. https://doi.org/10.1016/j.csite.2021.101366
  14. Tritt, T. M. (2002). Thermoelectric Materials: Principles, Structure, Properties, and Applications. Encyclopedia of Materials: Science and Technology, 1–11. https://doi.org/10.1016/b0-08-043152-6/01822-2
  15. Wirth, O., Foreman, A. M., Friedel, J. E., & Andrew, M. E. (2020). Two discrete choice experiments on laboratory safety decisions and practices. Journal of Safety Research, 75, 99–110. https://doi.org/10.1016/j.jsr.2020.08.005
  16. Zairi, M. (1994). Marlow Industries Inc. Measuring Performance for Business Results, 242–246. https://doi.org/10.1007/978-94-011-1302-1_22
  17. Zhang, P., Deng, B., Sun, W., Zheng, Z., & Liu, W. (2021). Fiber-based thermoelectric materials and devices for wearable electronics. Micromachines, 12(8), 1–15. https://doi.org/10.3390/mi12080869
  18. Zhang, Z., Zhang, Y., Sui, X., Li, W., & Xu, D. (2020). Performance of thermoelectric power-generation system for sufficient recovery and reuse of heat accumulated at cold side of TEG with water-cooling energy exchange circuit. Energies, 13(21). https://doi.org/10.3390/en13215542
  19. Zhao, D., & Tan, G. (2014). A review of thermoelectric cooling: Materials, modeling and applications. Applied Thermal Engineering, 66(1–2), 15–24. https://doi.org/10.1016/j.applthermaleng.2014.01.074

Open Access Copyright (c) 2023 Physics Education Research Journal
Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

 
apps