DESIGN OF TORSIONAL MODULUS EXPERIMENT TOOLS FOR BASIC PHYSICAL EXPERIMENT

Authors

  • Widyastuti Widyastuti Fakultas Sains & Teknologi Universitas Islam Negeri Walisongo Semarang, Indonesia

DOI:

https://doi.org/10.21580/at.v11i2.20735

Keywords:

torsional modulus, torsional modulus of elasticity, torsional modulus experiment, experiment guidance

Abstract

One can explain the material torque through a device called a torsional modulus. The Physics Laboratory of the Faculty of Science and Technology of UIN Walisongo Semarang does not yet have a torsional modulus experiment. With this torsional modulus experiment tool can increase the amount of experiment inventory and can be used as a means of supporting experiment in explaining the concept of torque. The purpose of this research is to design the torsional modulus experiment tool and compile the torsional modulus experiment guide so that it can be used in basic physics experiment courses in the physics laboratory of FST UIN Walisongo Semarang. The design of torsional modulus experiment tools developed with the Research and Development (R&D) procedure has been tested with a very high validity category. The design of the torsional modulus experiment guide has been tested with a very high validity category.

Downloads

Download data is not yet available.

References

Basri, H., & dkk. (2013). Pengembangan Media Pembelajaran Berbasis Komputer Pada Mata Pelajaran Ilmu Pengetahuan Alam Untuk Meningkatkan Motivasi Belajar Siswa Sekolah Dasar. Inovasi Pendidikan, 3(1), 1–110.

Hadi, A., & Sudrajad, H. (2017). Development of Modulus Twist Experiment Equipment As a Media High School Physics Learning. JOMFKIP, 4, 1–9. Retrieved from https://jom.unri.ac.id/index.php/JOMFKIP/article/view/13677

Rustaman, N. Y. (1995). Peranan Praktikum dalam Pembelajaran Biologi. Bandung: FPMIPA IKIP.

Suganda, E., & Rahmawaty. (2017). UJI KEKUATAN PUNTIR MATERIAL STAINLESS STEEL 304 DENGAN PERLAKUAN PANAS. 1–6. Retrieved from http://journal.stth-medan.ac.id/mahasiswa/index.php/doc_download/337-v1218-uji-kekuatan-puntir-material-stainless-steel-304-dengan-perlakuan-panas-dan-tanpa-perlakuan-panas

Waluyo, M. E. (2014). Pengembangan Panduan Praktikum IPA Terpadu Berbasis Inkuiri Terbimbing untuk Menumbuhkan Keterampilan Kerja Ilmiah Siswa SMP. Universitas Negeri Semarang.

Wibowo, S. (2014). Pembuatan Alat Praktikum Modulus Puntir. Surakarta : Universitas Sebelas Maret.

Winataputra, U. S. (1993). Strategi Belajar Mengajar IPA. Jakarta: Universitas Terbuka.

Zainuddin, M. (1996). Panduan Praktikum dalam Mengajar di Perguruan Tinggi. Jakarta: PAU-PPAI Direktorat Jendral Pendidikan Tinggi. Departemen Pendidikan dan Kebudayaan

Downloads

Published

2019-11-30

Issue

Volume 11, Nomor 2, Tahun 2019

Section

Articles

License

The copyright of the received article shall be assigned to the journal as the publisher of the journal. The intended copyright includes the right to publish the article in various forms (including reprints). The journal maintains the publishing rights to the published articles. Therefore, the author must submit a statement of the Copyright Transfer Agreement.*)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.  

In line with the license, authors and third parties (readers, researchers, and others) are allowed to share and adapt the material. In addition, the material must be given appropriate credit, provided with a link to the license, and indicated if changes were made. If authors remix, transform or build upon the material, authors must distribute their contributions under the same license as the original.

________

*) Authors whose articles are accepted for publication will receive confirmation via email and send a Copyright Transfer Agreement.